The Mosbaek CEV flow controllers meet the following functional requirements, which may therefore be specified in invitations for tenders:
The CEV regulator is provided with a coupling (wedge coupling) and lifting rod enabling comfortable and clean installation and dismounting from ground level. Consequently, inspections, service or capacity changes may be carried out under hygienic conditions considering the working environment. Actually, it is the only flow regulator of its kind on the market, which can be adjusted on site without the use of replacement parts.
If the regulator is provided with a closed coupling claw on the front, the following features will be obtained:
The design of the CEV has been changed and the product range has been extended to comprise approx. 70 versions, meaning that ideal characteristics may be obtained in almost any case. The regulator ensures that the flow, Q, is almost constantly equal to the nominal capacity, Qdim, over a large interval of upstream heads, H. This means that the capacity, Qdim, may be obtained at the top of the “bump” of the characteristics as well as at the design point. This may be seen on the CEV characteristic curve.
The detailed shaping of the inlet results in a strong contraction of the inlet jet resulting in an increase of the braking effect of approx. 25% as well as a larger orifice opening as compared with certain plagiarisms.
The CEV flow regulators offer the following advantages:
Thus, the operating and maintenance costs may be kept to a minimum.
Low initial costs are obtained, as usually the CEV may be installed in existing wells; however, a sump will be required.
Generally the CEV flow regulators are used in connection with:
This type of flow regulators can also be applied in many other situations. Please contact us for further information.
Mosbaek North America, Inc. • 3525 Piedmont Road • 7 Piedmont Center • Atlanta GA 30305 • E-mail firstname.lastname@example.org